User's Manual Part 3

6-3
■ Break-in function
The break-in function is used in CW mode to automat-
ically toggle the transceiver between transmit and re-
ceive when keying. The IC-7800 is capable for full
break-in or semi break-in.
D
Semi break-in operation
During semi break-in operation, the transceiver selects
transmit when keying, then automatically returns to re-
ceive after a pre-set time from when you stop keying.
q Push [CW] to select CW or CW-R mode.
w Push [VOX/BK-IN] several times to turn the semi
break-in function ON.
• “BK IN” appears.
e Rotate [DELAY] to set the break-in delay time (the
delay from transmit to receive).
When using a paddle, rotate [KEY SPEED] to adjust
the keying speed.
D
Full break-in operation
During full break-in operation, the transceiver auto-
matically selects transmit while keying and returns to
receive immediately after keying is finished.
q Push [CW] to select CW or CW-R mode.
w Push [VOX/BK-IN] several times to turn the full
break-in function ON.
• “F-BK IN” appears.
When using a paddle, rotate [KEY SPEED] to adjust
the keying speed.
[KEY SPEED] (inner control) [DELAY] (outer control)
[VOX/BK-IN] [CW]
6
FUNCTIONS FOR TRANSMIT