User's Manual Part 4

9-5
Fine programmed scan/fine F scan
Fine scan functions as programmed or F scan, but
scan speed decreases when the squelch opens but
does not stop. The scanning tuning step shifts from
50 Hz to 10 Hz while the squelch opens.
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Push [F-5•SCAN] to select the scan screen.
e Set for programmed scan or F scan as described
on previous page.
r Push [F-1•PROG] or [F-2•F] to start a scan.
” or “ ” and decimal points
blink while scanning.
t Push [F-3•FINE] to start a fine scan.
” or “ ” blinks
instead of “ ” or “ ,” respec-
tively.
y When the scan detects a signal, the scan speed de-
creases but does not stop.
u Push [F-1•PROG] or [F-2•F] to stop the scan; push
[F-3•FINE] to cancel the fine scan.
Rotating the main dial also cancels the scan.
i Push [F-6•RECALL] for 1 sec. to recall the fre-
quency that is set before starting the scan, if de-
sired.
[F-2•F][F-1•PROG] [F-3•FINE] [EXIT/SET]
9
SCANS