User's Manual Part 4

10-4
■ Antenna memory settings (continued)
D
Temporary memory
The antenna temporary memory memorize the manu-
ally selected antenna. The selected antenna will be re-
called even the frequency band has been changed.
q Select the antenna set screen.
w Push [F-4•TEMP-M] to turn the temporary memory
ON and OFF.
e Select the desired frequency band with a band key.
r Push [ANT] to select the desired antenna.
•“★” appears when a different antenna from the original is
selected.
t Push [F-1•ANT MR] to re-call the original antenna.
•“★” disappears.
y Push [EXIT/SET] to exit antenna set screen.
CAUTION!: Before transmitting with the manually
selected antenna, make sure the selected antenna
suits to the operating frequency. Otherwise the
transceiver may damage.
D
Antenna selection mode
The automatic antenna selection (antenna memory)
and the [ANT] switch function can be deactivated if de-
sired.
q Select the antenna set screen.
w Push [F-6•[ANT] SW] to select the antenna selec-
tion from Auto, OFF and Manual.
• Auto : Use the antenna memory. Antenna se-
lection with [ANT] switch is also avail-
able.
• OFF : The antenna connected to [ANT1] can
only be used. [ANT] switch is deacti-
vated.
• Manual : Deactivate the antenna memory func-
tion. Antenna can be selected with
[ANT] switch operation only.
e Push [EXIT/SET] to exit antenna set screen.
Push [F-6•[ANT] SW] to select the
antenna selection mode.
“★” appears when a different antenna
from the original is selected.
Push [F-4•TEMP-M] to turn the
temporary memory ON and OFF.
10
ANTENNA TUNER OPERATION