User's Manual Part 4

8-2
■ Memory channels
The transceiver has 101 memory channels. The mem-
ory mode is very useful for quickly changing to often-
used frequencies.
All 101 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the main dial, etc. in memory mode.
■ Memory channel selection
D
Using the [
Y
]/[
Z
] keys
q Push [V/M] to select memory mode.
w Push [Y]/[Z] several times to select the desired
memory channel.
• Push and hold [Y]/[Z] for continuous selection.
• [UP] and [DN] on the microphone can also be used.
e To return to VFO mode, push [V/M] again.
D
Using the keypad
q Push [V/M] to select memory mode.
w Push [F-INP•
ENT
].
e Push the desired memory channel number using the
keypad.
• Enter 100 or 101 to select scan edge channel P1 or P2,
respectively.
r Push [Y] or [Z] to select the desired memory chan-
nel.
[EXAMPLE]
To select the memory channel 3;
- Push [F-INP•
ENT], [7•3], then push [Y] or [Z].
To select the memory channel 12;
- Push [F-INP•
ENT], [1.8•1], [3.5•2], then push [Y] or
[Z].
To select the scan edge channel P1;
- Push [F-INP•
ENT], [1.8•1], [50•0], [50•0], then push
[Y] or [Z].
To select the scan edge channel P2;
- Push [F-INP•
ENT], [1.8•1], [50•0], [1.8•1], then push
[Y] or [Z].
[Y] [Z] [V/M]
Keypad
[F-INP•ENT]
[Y] [Z] [V/M]
8
MEMORY OPERATION
MEMORY
MEMORY
TRANSFER
OVER-
CHANNEL
CHANNEL CAPABILITY
TO VFO WRITING
CLEAR
NUMBER
Regular memory
1–99
One frequency and one mode
Yes Yes Yes
channels in each memory channel.
Scan edge
One frequency and one mode in
memory P1, P2 each memory channel as scan Yes Yes No
channels edges for programmed scan.