Instruction Manual

22
4
BIIS OPERATION
4
DD
Displaying the received call record
— Queue indication
The transceiver memorizes the calling station IDs for record. Up to
3 calls can be memorized, and the oldest call record is erased
when a 4th call is received. However, once the transceiver is pow-
ered OFF, the all records are cleared.
q Push [P1] (Digital) for 1 sec.
• Displays following indication.
When a record is available
When no record is available
w Push [ ]/[ ] to select the desired call.
e Push [P1] (Digital) for 1 sec. again to return to standby condi-
tion.
• When no operation is performed for 30 sec., the transceiver returns
to standby condition automatically.
21
4
BIIS OPERATION
DD
Group call
q When a group call is received;
• Beeps sound.
•“ ” appears and the mute is released.
• The programmed text message (e.g.“”) and the calling sta-
tion ID (or text) is displayed alternately, depending on the setting.
•“ ” appears or blinks depending on the setting.
w Push and hold [PTT], then speak into the microphone at a nor-
mal voice level.
NOTE: Only one station is permitted.
• Transmit/Busy indicator lights red.
e Release [PTT] to return to receive.
• Transmit/Busy indicator lights green while receiving a signal.
r To finish the conversation, push [P3] (Moni(Audi)) to send the
“Clear down” signal.
• Either station can be send.
•“ ” is displayed for 2 sec. (approx.)
•“ ” disappears and the transceiver returns to standby condition.
Appears or blinksAppears
!IC-F50_F60 BIIS.qxd 03.9.3 1:38 PM Page 21 (1,1)