User Manual

3
2
PANEL DESCRIPTION
New2001
2
■ Function display
q TRANSMIT INDICATOR (p. 7)
“” appears while transmitting.
w BUSY INDICATOR (p. 7)
“” appears when receiving a signal or when the
squelch opens.
e CHANNEL NUMBER READOUT
➥ Indicates the selected operating channel number. “A”
appears when a simplex channel is selected. (p.6)
➥ In set mode, indicates the selected condition. (p. 12)
r CHANNEL NAME INDICATOR
➥ Channel name appears if programmed. (p. 8)
➥ “” scrolls when the battery voltage drops
to approx. 10 V DC or below.
➥ “” blinks during dualwatch; “” blinks during tri-
watch. (p. 9)
t TAG CHANNEL INDICATOR (p. 11)
Appears when a tag channel is selected.
y GPS INDICATOR
➥ “GPS” appears while valid position data is received.
➥ “GPS” blinks when invalid position data is received.
➥ “GPS” disappears when no GPS receiver is connected.
u DSC INDICATOR
➥ Indicates the DSC status.
i DUPLEX INDICATOR (p. 6)
Appears when a duplex channel is selected.
o WEATHER CHANNEL INDICATOR (p. 6)
➥ “WX” appears when a weather channel is selected.
➥ “WX ALT” appears when the weather alert function is in
use; blinks when an alert tone is received.
!0 CALL CHANNEL INDICATOR
“CALL” appears when the call channel is selected. (p. 5)
!1 CHANNEL GROUP INDICATOR
Indicates whether a U.S.A. (USA), International (INT), or
Canadian (CANADA) channel is in use.
!2 LOW POWER INDICATOR (p. 7)
“LOW” appears when low power is selected.
t
w
erq
u
y
io
!0
!2
!1
!IC-M302_draft.qxd 03.9.1 6:02 PM Page 3 (1,1)