User's Manual

5
3
BASICOPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
q Turn the power ON.
w Turn the Radar TX ON.
 •See“TurningpowerON/OFF”onpageatleft.
e Push[+]or[–]oneormoretimestoselectthe
display range.
•Thescreenrangereadoutshowsthemaximumrange
of the screen.
r Push[ENTER]toentertheRadarsettingmenu,
thenrotate[DIAL]tosetthegainlevelontheGain
menu.
 •Clockwiserotationincreasesthegain.
 •Increasedgainmayincreasescreennoise.
tPush[ENTER],andthen[u]oncetoselectthe
Sea menu, to set the sensitivity time control,
rotate[DIAL]counterclockwisetosettheSEAto
minimum.
y Push[ENTER],andthen[u]twicetoselectthe
Rain menu, to set the rain clutter control, then
rotate[DIAL] counterclockwise to setRAINto
minimum.
u Select Radar Display mode.
➥ Push [MENU], then rotate [DIAL] until the
“ R a d ar  D i s p l ay M o d e ” m e n u  b e c o m e s
highlighted.
➥ Push[ENTER],thenrotate[DIAL]toselectone
of Head-up; H-UP, North-up; N-UP, Course-up;
C-UP or True Motion; TM screens.
➥Push[ENTER],andthen[CLEAR]twice,toexit
the menu screen.
CAUTION: When setting of the SEA to a fully clockwise
position, close targets are blanked.
DHeadingmarker
The heading marker is a line that shows your ship’s
bow direction. (This marker will appear in the center
of the screen when the Head-up screen H UP is
selected.) The heading marker can be hidden when
the desired target is located under the heading
marker.
•Push[ENTER]toentertheRadarmenu,thenpush[u]
four times to select the Heading marker menu. Hold down
[ENTER]tohidetheheadingmarker.Release[ENTER]to
return.
DFixedrangerings
The fixed range rings can be used for rough distance
measurement.
➥ Push [MENU], then rotate [DIA L] until the
“Presentation”menubecomeshighlighted.
➥ Push[ENTER],thenrotate[DIAL]untilthe“Ring”
menu becomes highlighted.
➥ Push[ENTER],thenrotate[DIAL]toselectone
of Ring-OFF; OFF or any other three Ring levels;
Low, Mid, High.
➥Push[ENTER],andthen[CLEAR]twice,toexitthe
menu screen.
DManualtuning
The receiver tuning can be manually adjusted.
➥ Push[MENU],andthen[ENTER],toenterthe
Gainmenu.Thenrotate[DIAL]untilthe“Tune”
menu becomes highlighted.
➥ Push[ENTER],thenrotate[DIAL]toselectthe
“Manual...”menuandpush[ENTER]toturnthe
manualtuninglevelindicator,thenrotate[DIAL]to
setthe“TuneLevel”metertothemaximumlevel.
➥Push[ENTER]toexitthemanualtuningscreen.
DBrillianceadjustment
The intensity of the screen can be adjusted. When
you require continuous operation, but not constant
viewing, a lower setting can increase the life of the
LCD display.
•Keyillumination
The backlighting of the keys can be adjusted for
convenient operation.
Push[BRILL],andthen[u]threetimes,tocallupthe
“PanelBrill”menu.Thenrotate[DIAL]toselecttheil-
lumination level.
NOTE: Manual adjustment can be used. (See below.)
MENU
WPT
FOCUS
LAYOUT
MOB
CLEAR
SUB
BRILL
RANGE
u
[ENTER]
[CLEAR]
[MENU]
[
�
]
[LAYOUT]
[+] or [–]
(RANGE)
[ ]
■Basicoperation
You can automatically set SEA control.
➥ Push[MENU],thenrotate[DIAL]untilthe“Gain”
menu becomes highlighted.
➥ Push[MENU],thenrotate[DIAL]untilthe“Auto
Sea”menubecomeshighlighted.
➥ Push[ENTER],thenrotate[DIAL]toselect“ON.”
➥Push[ENTER],andthen[CLEAR]twice,toexitthe
menu screen.
MXR-5000T / Page 13-2-7