User's Manual

9
3
BASICOPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
To magnify the blips for easier viewing of small
targets, the long pulse and echo stretch functions are
available. When the long pulse is used in the
3
⁄4 to 2
NM range, this function magnifies target echoes to
the backward direction of the target.
•Pulseselection
qPush[MENU]toentertheMenuscreen.
wRotate [DIAL] until the“Radar Setup” menu
becomes highlighted.
ePush[ENTER]thenrotate[DIAL]untilthe“Signal
Process”menubecomeshighlighted.
rPush[ENTER]thenrotate[DIAL]untilthe“Pulse”
menu becomes highlighted.
tPush[ENTER] then rotate [DIAL]to selecta
desired pulse type, “Shor t” or“Long.” Push
[ENTER].
y Push[CLEAR]threetimestoexitthemenuscreen.
 •“SP”or“LP”appearsintheupperleftofthescreen.
NOTE: Select“Short”thisfunctionduringnormal
operation. This function reduces the target distance
resolution.
■Longpulsefunction (MENU w Radar Setup u Signal Process u Pulse)
qPush[MENU]toentertheMenuscreen.
wRotate [DIAL] until the“Presentation” menu
becomes highlighted.
ePush[ENTER]thenrotate[DIAL]untilthe“PPI
Area”menubecomeshighlighted.
rPush[ENTER] then rotate [DIAL]to selecta
desiredareasize,“Nar”or“Wide.”Push[ENTER].
t Push[CLEAR]twicetoexitthemenuscreen.
■PPIareaselection
(MENU w Presentation u PPI Area)
qPush[MENU]toentertheMenuscreen.
wRotate [DIAL] until the“Presentation” menu
becomes highlighted.
ePush[ENTER]thenrotate[DIAL]untilthe“Echo
Color”menubecomeshighlighted.
rPush[ENTER] then rotate [DIAL]to selecta
desiredechocolor,“Yellow-Black,”“Green-Black,”
“Red-Black,”“Multi-Black,”“Yellow-DarkBlue,”
“Green-DarkBlue,”“Multi-DarkBlue,”“Green-
White”or“Multi-White.”Push[ENTER].
t Push[CLEAR]twicetimestoexitthemenuscreen.
■EchoColorselection
(MENU w Presentation u Echo Color)
MXR-5000T / Page 13-2-11