User's Manual
Table Of Contents
- Front cover
- IMPORTANT
- EXPLICIT DEFINITIONS
- PRECAUTIONS
- FCC INFORMATION
- TABLE OF CONTENTS
- 1 ACCESSORIES
- 2 PANEL DESCRIPTION
- 3 BASIC OPERATION
- 4 PASSPORT OPERATION
- 5 LTR OPERATION
- 6 CONVENTIONAL OPERATION
- 7 OPTIONAL UNIT INSTALLATION
- 8 BATTERY CHARGING
- 9 BATTERY CASE
- 10 SWIVEL BELT CLIP
- 11 OPTIONS
- 12 SAFETY TRAINING INFORMATION
- Back cover
12
5
LTR OPERATION
■ Receiving a call
D Group call
q Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the LTR system channel or talk group.
wWhenacallisreceived;
•“ ”andthecallingstationname/IDappear.
e Push and hold [PTT], then speak into the microphone at
a normal voice level.
r Release [PTT] to return to receive.
D Selective call (DTMF call)
—Optional UT-108 is required—
q Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the LTR system channel or talk group.
w Push [Select call] to mute the channel.
•“ ”appears.
Appears
eWhenreceivingacall,thecallingstationnameappears
and a beep is emitted. Then the mute is released.
•“ ”disappears.
D Phone call
q Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the LTR system channel or talk group.
wWhenaphonecallisreceived(transceiverrings),push
and hold [PTT], then speak into the microphone at a
normal voice level.
•“ ”blinksandcallingstationname/IDappearsfor1sec.
Blinks
e Release [PTT] to return to receive.
r Push [#] while pushing [PTT] to finish the communication.