User's Manual

16
6
CONVENTIONALOPERATION
■ Emergency transmission
When[Emergency] is pushed and held for the specified
time period, the DTMF emergency signal is automatically
transmitted once or repeatedly on the emergency channel.
However, when no emergency channel is specified, the sig-
nal is transmitted on the previously selected channel.
If you want to cancel the emergency call, push and hold the
key again before transmitting the call.
■ Scrambler function
The voice scrambler function provides private communi-
cation between stations. The frequency inversion type is
equipped to all versions, moreover, the optional Rolling or
Non-rolling type can be available.
q Push [Scrambler] to turn the scrambler function ON.
 •“ ”appears.
w Push [Scrambler] again to turn the scrambler function
OFF.
 •“ ”disappears.
■ Stun function
Whenthespecifiedcode,setasastuncode,isreceived,
thestunfunctionwillbeactivated.Whenthestuncodeis
received,“STUNNED”appearsonthedisplayandthetrans-
ceiver cannot be used. To use the transceiver, the stun re-
lease code must be received.
Also,ifthetransceiver’srunningtimeexceedsthepreset
running time limit, the transceiver cannot be used. To use
the transceiver, extend the running time limit or turn the Run
Time Limit function OFF using the CS-F43TR
c l o n i n g s o f t -
w a r e .
■ Man Down transmission
WhentheoptionalUT-124m a n d o w n u n i t is installed, the
Man Down function can be used. The Man Down function
transmits a man down emergency call after the specified
time period has passed with the transceiver in a horizontal
position.