User's Manual

ManualsBrandsICOM ManualsElectronicsUHF Transceiver

PANEL DESCRIPTION

u 10-KEYPAD (Depending on version)

The keypad allows you to enter digits to:

• Select memory channels

• Select tone channels

• Select DTMF codes (during transmit)

• Set TX codes

• Set BIIS status number

• Input text message for SDM operation

• Start up with the password

i UP/DOWN KEYS

➥ Push to select an operating channel.

➥ Push to select a TX code channel after pushing

[TX CODE CH SELECT].

➥ Push to select a DTMF channel after pushing [DTMF].

➥ Push to select a scan group after pushing and holding

[SCAN].

➥ Push to select a BIIS code, status number or SDM

after pushing [DIGITAL].

* Desired functions can be programmed independently by your

dealer. (p. 7)

o PTT SWITCH [PTT]

➥ Push and hold to transmit; release to receive.

➥ Push to transmit the call during MSK operation,

depending on the setting.

!0 MONITOR KEY

➥Mute and release the CTCSS (DTCS) or 2-tone

squelch mute. Open any squelch/deactivate any mute

while pushing this key. (LMR operation only)

➥ Activates one of (or two of) the following functions on

each channel independently.

(PMR or BIIS PMR operation only)

• Push and hold the key to unmute the channel (audio is

emitted; ‘audible’ condition).

• Push the key to toggle the mute and unmute conditions

(toggles ‘audible’ and ‘inaudible’).

• Push the key to mute the channel (sets to ‘inaudible’ only).

• Push the key to unmute the channel (sets to ‘audible’ only).

• Push the key after communication is nished to send a ‘reset

code.’

• Push the key after communication is nished to send a ‘clear

down code’ during BIIS operation on an MSK channel.

NOTE: The unmute condition (‘audible’ conditions)

may automatically return to the mute condition

(‘inaudible’ condition) after a speciﬁed period.

* Desired function can be programmed by your dealer. (p. 7)

!1 ANTENNA CONNECTOR

 Connects the supplied antenna.