User Manual

Thank you for purchasing the
FA-SC61UC
UHF ANTENNA .
Please read these instructions
thoroughly before using the
FA-SC61UC.
400 MHz
420 MHz
440 MHz
460 MHz
480 MHz
500 MHz
520 MHz
380 MHz
360 MHz
0
Antenna cap
FA-SC61UC
The optimum bandwidth is ±8%
of the tuned frequency.
For optimum performance tune
to the center transmit frequency
of the radio.
Cutting Instructions
q Align the bottom of the anten-
na onto the 0 position of the
cutting guide diagram at left.
w Mark the antenna at the
length corresponding to the
desired frequency to be
tuned.
FA-SC61UC
A-6532K-1EX-w Printed in Japan
© 2006-2009 Icom Inc.
e Cut the antenna to the
marked length.
• Use a wire cutter that can
cut at least 1.2 mm (d) of
piano wire.
r Apply adhesive to the top of
the antenna and attach the
supplied antenna cap.
• Use of Cemedine Co.
Super-X No. 8008 black
(Icom parts number:
8950002910) or similar is
recommended.
Antenna Cutting
Chart
NOTE:
Antenna cap must be in s e r t e d af t e r
cut ting the eleme nt otherw ise wat e r
immersion makes the element damaged.
Center
frequency
(MHz)
Length
(mm)
185
175
165
156
148
142
136
129
125
360
380
400
420
440
460
480
500
520
CAUTION:
Making antenna cuts at other than
the prescribed lengths specified could
void the user's authority to operate
the equipment.