User's Manual Part 1

III
QUICK REFERENCE GUIDE
■ Your first contact
Now that you have your IC-V82 ready, you are exited to get
on the air. We would like to walk you through a few basic op-
erational steps to make your first “On The Air” use an enjoy-
able experience.
D About default setting
The [VOL] control function can be traded with [
Y
Y
]/[
ZZ
] keys func-
tion in
INITIAL SET MODE . However, in this QUICK REFERENCE,
the factory default setting ([VOL] controls audio output level) is
used for simple instructions.
D Basic operation
1. Turning ON the transceiver
Although you have purchased a brand new transceiver, some
settings may be changed from the factory defaults because
of the QC process. Resetting the CPU is necessary to start
from factory default.
➥ While pushing [MONI] and
[D• CLR ], push [PWR] for 1 sec. to
reset the CPU and turn power ON.
2. Adjusting sudio output level
➥ Rotate [VOL] to set the desired
audio level.
3. Adjusting the squelch level
➥ While pushing and holding
[MONI], push [
Y
Y
] or [
ZZ
] to set the
squelch level.
4. Tune the desired frequency
The up/down keys, [
Y
Y
]/[
ZZ
], will
allow you to tune the frequency that
you want to operate on. Page 14 will
instruct you on how to adjust the tun-
ing step.
➥
Push [
Y
Y
] or [
ZZ
] to adjust the fre-
quency.
PWR
MONI
CLR
D
MONI
[VOL]