User's Manual Part 1

qPush [D• CLR ] to select VFO mode, if necessary.
wSet the desired frequency.
eSet other information, such as tone, duplex, as desired.
rPush [A• FUNC ], then [C• MR ] momentarily.
•“
X
” and memory channel number blink.
tPush [
Y
Y
] or [
ZZ
] to select the desired memory channel.
• When programming the call channel, select “C.”
• When [VOL] is assigned as tuning dial, rotate [VOL] to select
the memory channel. (pgs. 14, 63)
yPush [A•
FUNC ], then push [C• MR ] for 1 sec. (until 3 beeps
are emitted) to program the information into the selected
memory channel and return to VFO.
• Continue to hold [C•
MR ] down for 1 sec. after 3 beeps are emit-
ted, to increment the displayed memory channel number.
MONI
CALL
DUP SCAN
PRIO ENT SET H/M/L
OPTSKIP
BANK TONE T.SCANP.BEEP
MR CLRFUNC
PWR
987
4
123
AB DC
560
MONI
CALL
DUP SCAN
PRIO
ENT SET H/M/L
OPTSKIP
BANK TONE T.SCANP.BEEP
MR CLRFUNC
PWR
987
4
123
AB DC
560
MR
FUNC
A
C
MONI
CALL
DUP SCAN
PRIO
ENT SET H/M/L
OPTSKIP
BANK TONE T.SCANP.BEEP
MR CLRFUNC
PWR
987
4
123
AB DC
560
MONI
CALL
DUP SCAN
PRIO
ENT SET H/M/L
OPTSKIP
BANK TONE T.SCANP.BEEP
MR CLRFUNC
PWR
987
4
123
AB DC
560
MR
FUNC
A
C
21
6
MEMORY/CALL OPERATION
6
■ Programming the memory/call channels