User's Manual Part 1

■ Channel name programming
qSelect a “Channel Name Indication” type in
INITIAL SET
MODE (p. 63).
wPush [C• MR ] to select memory
mode, if necessary.
ePush [A• FUNC ], then push [8• SET ]
to enter into the channel name
programming mode.
• The character to be edited blinks.
rRotate [VOL] to select a charac-
ter.
tPush [
Y
Y
] to move to the right, [
ZZ
] to move to the left.
• Up to 5 characters can be used for channel name.
• Usable characters are A–Z, 0–9, “space,” +, –, =, ✱, /, [, ] and :.
y Push [✱•
ENT ] (or [D• CLR ]) to fix and exit the channel
name programming mode.
■ Memory transferring
This function transfers a memory channel’s contents to VFO
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the offset frequency, subaudible tone frequency etc.
D Memory/call ➾ VFO
qSelect the memory (call) channel
to be transferred:
➥ Push [C•
MR ] or [B• CALL ] to se-
lect memory (call) mode.
➥ Push [
Y
Y
] or [
ZZ
] to select the
memory channel.
• When [VOL] is assigned as tuning
dial, rotate [VOL] to select the
memory channel. (pgs. 14, 63)
wPush [A•
FUNC ], then push [C• MR ]
for 1 sec. to transfer the selected
memory contents to the VFO.
• VFO mode is selected automatically.
22
6
MEMORY/CALL OPERATION
FUNC
A
MR
C
CALL
B
FUNC
A
MR
C
SET
8
[VOL]
ENT