User's Manual Part 1
D Memory/call ➾ call/memory
qSelect the memory (call) channel
to be transferred:
➥ Push [C•
MR
] or [B•
CALL
] to se-
lect the memory (call) mode.
➥ Push [
Y
Y
] or [
ZZ
] to select the
memory channel.
• When [VOL] is assigned as tuning
dial, rotate [VOL] to select the
memory channel. (pgs. 14, 63)
wPush [A•
FUNC
], then push [C•
MR
]
momentarily.
• “--” and “
X
” blink.
ePush [
Y
Y
] or [
ZZ
] to select the target memory.
• When [VOL] is assigned as tuning dial, rotate [VOL] to select
the target channel. (pgs. 14, 63)
rPush [A•
FUNC
], then push [C•
MR
] for 1 sec.
• Memory mode is selected and the contents are transferred to the
target memory.
D Clearing a memory
qPush [A•
FUNC
], then push [C•
MR
]
to enter the memory transfer
mode.
•“
X
” and a memory channel num-
ber blink.
wPush [
Y
Y
] or [
ZZ
] to select the
memory channel to be cleared.
• When [VOL] is assigned as tuning
dial, rotate [VOL] to select the mem-
ory channel. (pgs. 14, 63)
• The call channel cannot be cleared.
ePerform the following operation within 1.5 sec, otherwise
the memory clearing is cancelled and the transceiver re-
turns to the memory mode.
- Push [A•
FUNC
], then push [C•
MR
] momentarily.
- Push [A•
FUNC
], then push [C•
MR
] for 1 sec.
• The contents of the selected memory are cleared.
rPush [D•
CLR
] to return to regular operation.
23
6
MEMORY/CALL OPERATION
FUNC
A
MR
C
CALL
B
FUNC
A
MR
C
6