User's Manual Part 1

24
6
MEMORY/CALL OPERATION
■ Memory bank selection
The IC-V82 has a total of 10 banks (A to J). Regular memory
channels, 0 to 199, are assigned into the desired bank for
easy memory management.
q Push [C•
MR ] to select memory mode.
w Push [A•
FUNC ] and [#• BANK ] to select memory bank con-
dition.
• Bank initial blinks.
e Rotate [VOL] to select the desired bank, A to J.
• Banks that have no programmed contents are skipped.
r Push [✱•
ENT ] (or [D• CLR ]) to set the bank.
• Initial stops blinking.
t Push [
Y
Y
] or [
ZZ
] to select the contents in the bank.
• No channel numbers are displayed for memory bank operation.
y To return to regular memory condition, push [A•
FUNC ] and
[#• BANK ] to enter memory bank condition, then push
[✱• ENT ] (or [D• CLR ]).
■ Memory bank setting
q Push [C•
MR ] to select memory mode, then select the de-
sired memory channel via [
Y
Y
] or [
ZZ
].
w Push [A•
FUNC ] and [8• SET ] to enter SET MODE .
e Push [
Y
Y
] or [
ZZ
] several times until “bAk” appears.
• “– –” indication blinks as follows.
r Rotate [VOL] to select the desired bank to be set.
t Push [✱•
ENT ] (or [D• CLR ]) to set the channel into the
bank and return to regular memory condition.
y Repeat steps q to t to set another memory channel into
the same or another bank.