User's Manual Part 1

25
6
MEMORY/CALL OPERATION
6
■ Transferring bank contents
Contents of programmed memory banks can be cleared or
transferred to another bank.
INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
q
Select the desired bank contents to be transferred or erased.
➥ Push [C• MR ] to select memory mode.
➥ Push [A• FUNC ] and [#• BANK ], then rotate [VOL] to se-
lect the desired memory bank.
• Bank initial blinks.
➥ Push [✱• ENT ] (or [D• CLR ]) to select the bank then
push [
Y
Y
] and [
ZZ
] to select the desired contents.
• Bank initial stops blinking.
w Push [A•
FUNC ] and [8• SET ] to enter SET MODE .
e Push [
Y
Y
] or [
ZZ
] several times until “bAk” appears.
• Bank initial appears.
r Rotate [VOL] to select the desired bank initial to transfer or
erase.
• Select “– –” indication when erasing the contents from the bank.
t Push [✱•
ENT ] (or [D• CLR ]) to transfer or erase, and re-
turn to regular memory condition.
y Repeat steps q to t for transferring or erasing an an-
other banks contents.