User's Manual Part 1
26
DTMF MEMORY
7
■ Programming a DTMF code
The transceiver has 16 DTMF memory channels (d0 to dF)
for storage of often-used DTMF codes of up to 24 digits.
qPush [A•
FUNC
], then push [0•
OPT
] to enter
OPTION SET
MODE
.
• Rotate [VOL] to select “dtm.OF,” if necessary.
wPush [0•
OPT
] for 1 sec. to enter the DTMF memory.
• One of “d0” to “dF” appears.
e
Rotate [VOL] to select the desired channel.
rPush [0•
OPT
] for 1 sec. to enter the DTMF programming
mode.
•“_____” appears.
• Programmed memories can be cleared in this way.
tPush the digit keys, [A•
FUNC
], [B•
CALL
], [C•
MR
], [D•
CLR
],
[#•
BANK
] and [✱•
ENT
] to enter the desired DTMF code.
•Amaximum of 24 digits can be input.
• [✱•
ENT
] enters as “E”, [#•
BANK
] enters as “F.”
• If a digit is mistakenly input, push [MONI] or [PTT] momentarily
then repeat from step q.
yPush [MONI] or [PTT] to fix the digits and exit the DTMF
programming mode.
• Programmed DTMF codes sound when [MONI] is pushed.
MONI
CALL
DUP SCAN
PRIO
ENT
SET
H/M/L
OPTSKIP
BANK
TONE
T.SCANP.BEEP
MR CLRFUNC
PWR
987
4
123
AB DC
560
OPT
0
Push for 1 sec.
OPT
0
Push for 1 sec.
FUNC
A
OPT
0
Push
The DTMF memory consists of 5 pages that are 1st to 5th, 6 to
10th, 11 to 15th, 16 to 20th and 21st to 24th digits.
1st page indication
4th page indication 5th page indication
2nd page indication 3rd page indication
Appears
Appears
Blinks