User's Manual Part 1
27
7
DTMF MEMORY
7
■ Transmitting a DTMF code
D Using a DTMF memory channel
qPush [A•
FUNC
], then push [0•
OPT
] to enter
OPTION SET
MODE
.
• Rotate [VOL] to select “dtm.OF,” if necessary.
wPush [0•
OPT
] for 1 sec. to enter the DTMF memory.
eRotate [VOL] to select the desired channel.
rPush [MONI] or [PTT] to exit the DTMF memory mode.
tWhile pushing [PTT], push [MONI] to transmit the selected
DTMF memory.
• After the DTMF code is transmitted, the transceiver returns to re-
ceive automatically.
D Manual DTMF code transmission
While pushing [PTT], push digit keys, [A•
FUNC
], [B•
CALL
],
[C•
MR
], [D•
CLR
], [#•
BANK
] and [✱•
ENT
] to transmit a DTMF
code manually.
• [✱•
ENT
] enters as “E”, [#•
BANK
] enters as “F.”
■ DTMF transmission speed
When slow DTMF transmission speeds are required with
DTMF memory transmission (as for some repeaters), the
transceiver’s rate of DTMF transmission can be adjusted.
qWhile pushing [
Y
Y
] and [
ZZ
], turn the power on to enter
INI
-
TIAL SET MODE
.
wPush [
Y
Y
] or [
ZZ
] several times until “dtd” appears.
eRotate [VOL] to select the desired DTMF transmission
speed.
• Four speeds are available: “1” (100 msec. intervals) is the fastest;
“5” (500 msec. intervals) is the slowest.
rPush [✱•
ENT
] to exit
INITIAL SET MODE
.
USING
INITIAL SET MODE