User's Manual Part 2

44
11
DIGITAL MODE OPERATION
D
D
When calling the desired station
(continued from p. 43 step t)
ySelect the desired call sign.
- Push [
Y
Y
] or [
ZZ
] several times
to select the call sign select
mode.
• “yUC” appears.
- Push [0•opt] then rotate [VOL] to select the desired call
sign (pre-programmed), or set the desired call sign. (see
p. 38)
- Push [✱•
ENT ] to exit OPTION SET MODE .
uPush and hold [PTT] to transmit and speak into the micro-
phone at normal voice level.
•Transmit indicator appears and the RF meter shows the output power.
iRelease [PTT] to return to receive.
• The other station call sign will be received.
• Received call signs can be stored into the received call record
automatically. See page 42 for details.
■ When receiving a Digital call
When an individual station call is received, the calling station
call sign can be stored into the received call record.
The record is cleared once turning power OFF.
D
D
Received call record
q Push [A•
FUNC ] then [0• OPT ] for enter OPTION SET MODE ,
then push [
Y
Y
] or [
ZZ
] several times
to select the received
call indication.
•“RXCALL,” “R1CALL,” and “R2CALL” are available for the re-
ceived station call sign, repeater 1/2 call signs, respectively.
w To confirm the received call, push [0•
OPT ] for 1 sec. to
enter the received call sign indication mode.