User's Manual Part 2

46
11
DIGITAL MODE OPERATION
■ EMR communication
The EMR communication mode is available for Digital mode
operation. In the EMR call, no call sign setting is necessary.
q Set the desired frequency then push [A•
FUNC ] and [0• OPT ]
to enter OPTION SET MODE .
w Push [
Y
Y
] or [
ZZ
] several times to select the EMR setting,
then turns the EMR setting ON.
• “EmR” appears.
eOperate the transceiver normal way.
rTo cancel the EMR communication mode, push [A•
FUNC ]
and [0• OPT ] for 1 sec., then rotate [VOL] to turn OFF.
■ Pocket beep operation
This function uses a digital code/call sign for calling and can
be used as a “common pager” to inform you that someone
has called while you were away from the transceiver. The dig-
ital code or call sign squelch does not function while in a low-
speed data communication.
DD
Waiting for a call from a specific station
q Set the operating frequency.
w Program the digital code or call sign in setting mode.
• See p. 51, “Digital code setting” or p. 40 “Call sign program-
ming.”
e Push [A• FUNC ] and [1• TONE ] one or more times until “ ”
or “ ” appears in the function display.
•“ ” for call sign squelch; “ ” for digital code squelch operation.
r Push [A•
FUNC ], then push [2• P . BEEP ] to activate the pocket
beep function.
•“ ” appears.
t When a signal with the matched call sign/digital code is re-
ceived, the transceiver emits beep tones and blinks “ .”
• Beep tones sound for 30 sec. and “ ” blinks. To stop the beeps man-
ually, push any key. “ ” continues blinking until step y is operated.
y Push [PTT] to answer.
• “ ” disappears and cancels the pocket beep function automati-
cally.
u To cancel the call sign/digital code squelch, push [A• FUNC ]
and [1• TONE ] one or more times until or “ ” or “ ” disap-
pears.