User's Manual Part 2

50
11
DIGITAL MODE OPERATION
■ Repeater call sign programming
Repeater call sign must be programmed for the repeater op-
eration in both Digital voice and low speed data communica-
tions.
q Push [A•
FUNC ] and [0• OPT ] to enter OPTION SET MODE , then
push [
Y
Y
] or [
ZZ
] several times to select the call sign items.
• “R1C” or “R2C” appears for repeater call sign.
w Push [0•
OPT ] for 1 sec. then rotate [VOL] to select the de-
sired call sign channel.
e Push [
Y
Y
] (or [
ZZ
]) to set into call sign programming condi-
tion.
• The 1st digit blinks and channel indication stops blinking.
r Rotate [VOL] to set the desired character or code.
• Push [
Z
Z
] or [
YY
] to move the cursor to left or right, respectively.
t Push [
Y
Y
] (or [
ZZ
]) to select 2nd digit, then rotate [VOL] to
set the desired character or code.
• 2nd digit blinks (1st digit stop blinking).
• Repeat this step for programming repeater call sign.
y Push [0•
OPT ] to fix the call sign.
u Rotate [VOL] to select an another channel from “C1” to
“C6.”
i Repeat steps w to u to program another repeater call
sign channels.
✔ For your information:
Station and/or repeater call sign can be programmed from
Received call record when a call is received.
See page 45 for details.
✔ For your information:
Repeater call sign can be programmed gateway connection
capabilities at step r for connecting to the other Area or
Zone.
• “G” appears or disappears at the 8th digit when each pushing
[8• SET ].