User's Manual Part 2

56
11
DIGITAL MODE OPERATION
D
D
GPS Automatic transmission
q While connecting a GPS receiver, push [A•
FUNC ] and
[0• OPT ] to enter OPTION SET MODE .
w Push [
Y
Y
] or [
ZZ
] several times to select the GPS automatic
transmission.
• “GtX” appears.
e Rotate [VOL] to set the interval time for the GPS auto-
matic transmission.
• Interval time is selectable from 0.5 (30 sec.), 1, 3, 5, 10, 30 min.
rPush [
Y
Y
] three times to select the transmit message se-
lection, if desired.
• GPS TX message is selectable from OFF and C1 to C6.
• TX message must be programmed in advance. (see page 50 for
setting)
tPush [✱•
ENT ] (or [D• CLR ]) to exit OPTION SET MODE .
IMPORTANT: GPS Automatic transmission transmits at
every setting interval even while receiving an another sta-
tions communication. To prevent interfere the another sta-
tions, set the GPS transmission together with the Repeater
lockout item “RLO” (set to “bU” busy lockout) in
INITIAL SET
MODE . (p. 62)
D
D
Receiving a GPS transmission
q Push [A•
FUNC ] and [0• OPT ] to enter OPTION SET MODE .
w Push [
Y
Y
] or [
ZZ
] several times to select the received posi-
tion.
• “RXP.OS” appears.
ePush [0•
OPT ] for 1 sec. to enter the position indication.
• Latitude data and longitude date appear by every pushing [
Y
Y
]
or [
ZZ
].
rPush [0•
OPT ] then push [
Y
Y
] twice to select the received
GPS message.
tPush [0•
OPT ] for 1 sec. to enter the message.
• Received message is indicated, push [
Z
Z
] or [
YY
] to move the
cursor to left or right, respectively.
yAfter checking a received position and message, push
[✱•
ENT ] (or [D• CLR ]) to return to normal operating mode.