User's Manual Part 2

58
12
OTHER FUNCTIONS
D
D
DTCS code
Selects DTCS (both encoder/decoder code) for DTCS
squelch operation. Total of 104 codes are available.
• 023–754: 023 (default)
D
D
DTCS polarity
Selects DTCS polarities for transmission and reception from
“NN,” “NR,” “RN” and “RR.” (N: normal/R: reverse)
D
D
Tuning step
Selects tuning step from 5 (default), 10, 12.5, 15, 20, 25 , 30
and 50 kHz for [
Y
Y
]/[
ZZ
] or [VOL] (When [VOL] is assigned as
tuning dial) operation.
D
D
Offset frequency
Sets the duplex offset frequency within 0 to 20 MHz range.
During duplex (repeater) operation, transmit frequency (or re-
ceive when reverse function is set to ON) shifts the set fre-
quency. (default value may differ depending on versions)
D
D
Reverse function
Turns the reverse function ON and OFF (default).
Reverse function 
OFF (default)
Reverse function ON