User's Manual Part 2

OTHER FUNCTIONS

Power save

Selects duty cycle for power save function from auto, 1:32,

1:16, 1:8, 1:2 and OFF.

•P–S.At : Duty cycle changes automatically. (default)

• P–S.32 : 1:32 duty cycle

• P–S.16 : 1:16 duty cycle

• P–S. 8 :

1:8 duty cycle

• P–S. 2 :

1:2 duty cycle

• P–S.OF : The power save function is turned OFF.

NOTE: While DV mode operation (with UT-118), or pager/

CSQL operation (with UT-108), the active duty cycle is ﬁxed

1:1 only (even any duty cycle setting other than OFF).

Monitor key action

The monitor key, [MONI], can be set as a ‘sticky’ key. When

set to the sticky condition, each push of [MONI] toggles the

monitor function ON and OFF.

• PU (Push) : Pushing and holding [MONI] to monitor

the frequency. (default)

• HO (Hold) : Push [MONI] to monitor the frequency

and push again to cancel it.

Tuning speed acceleration

The tuning speed acceleration automatically speeds up the

tuning speed when pushing and holding [

] or [

], or rotat-

ing [VOL] rapidly.*

• S–S.At : The tuning speed acceleration is activated. (de-

fault)

• S–S. m: The tuning speed acceleration is not activated.

*When tuning dial is assigned with [VOL].