User Manual

22
6 DSC OPERATION
New2001
D Transmitting a position request call
Transmit a position request call when you want to know a
specied ships current position, etc.
q Push [DSC
POS] to enter the DSC menu.
w Push [Y] or [Z] to select , push [DSC
POS].
e Push [Y] or [Z] to select the desired pre-programmed in-
dividual address.
The ID code must be set in advance. (p. 14)
r Push [DSCPOS] to enter the standby condition for posi-
tion request call.
Channel 70 is selected and “” appears at the channel
comment indicator.
t Push [DSCPOS] to transmit the position request call.
y After the position request call has been transmitted, the fol-
lowing indication is displayed.
•“ scrolls at the channel comment indicator.
u Push any key to exit the condition and return to the previ-
ous indication before entering the DSC menu.
Scrolls
Transmitting
Scrolls
!IC-M422_FCC.qxd 05.1.14 11:30 AM Page 22 (1,1)