User's Manual

@9 MODE SWITCHES
Push to select your desired operating mode. (p. 43)
s4HEBUILTINSPEECHSYNTHESIZERANNOUNCESTHESELECTED
mode when the “SPEECH [MODE] SW” item is set to
“ON” in the Set mode. (p. 164)
 ;33"= (p. 47)
±
Push to alternately select the USB or LSB modes.
  sh53"vORh,3"vAPPEARS
± In the SSB mode, hold down for 1 second to s e-
lect
the SSB data mode (USB-D, LSB-D).
shD” appears in addition to “USB” or “LSB.”
± In the SSB data mode, push to return to the normal
SSB mode.
[CW/RTTY] (pp. 48, 56)
±0USH TO ALTERNATELY SELECT THE #7 OR 2449
modes.
  sh#7vORh2449vAPPEARS
± Hold down for 1 second to switch between the
CW and CW-R (CW reverse) modes, in the CW
mode.
sh#72vAPPEARSWHENTHE#7REVERSEMODEIS
selected.
± Hold down for 1 second to switch between the
2449AND244922449REVERSEMODESIN
THE2449MODE
sh24492vAPPEARSWHENTHE2449REVERSEMODEIS
selected.
[AM/FM] (p. 61)
±
Push to alternately select the AM or FM modes.
  sh!-vORh&-vAPPEARS
± Hold down for 1 second to select the AM or FM
data mode (AM-D/FM-D).
shD” appears in addition to “AM” or “FM.”
± In the data mode, push to return to the normal
AM or FM mode.
NOTE:
s)NTHE!-MODEYOUCANTRANSMITONONLYTHE
HF/50MHz frequency bands.
s4HE!-MODECANNOTBESELECTEDONTHE
MHz frequency band.
 ;$6s$2= (p. 85)
± Push to select the DV mode.
  sh$6vBLINKS
± Hold down for 1 second to select the DR mode.
sh$6vh” and “r” appear.
± In the DR mode, push to cancel it.
sh” and “r” disappear.
#0 FILTER SWITCH [FILTER] (p. 73)
± Push to select one of three IF filter settings (
/ /
).
s4HESELECTEDlLTERPASSBANDWIDTHANDSHIFTINGVALUE
are displayed for 2 seconds on the LCD display.
± Hold down for 1 second to display the “FIL”
screen (Filter) to set the filter passband width.
±
When the “FIL” screen is displayed, hold down for
1 second to return to the previous screen display.
#1 TRANSMIT FREQUENCY CHECK SWITCH [XFC]
± During split frequency or repeater operation, hold
down to listen to the transmit frequency. (p. 82)
s7HILE HOLDING DOWN THISSWITCHTHETRANSMIT FRE-
quency can be changed with the main dial, keypad
or memo pad.
s7HEN THE SPLIT LOCK FUNCTION IS TURNED /. PUSH
[XFC] to cancel the dial lock function. (pp. 82, 162)
± When the RIT function is turned ON, hold
down to listen to the receive frequency. (RIT is
temporarily cancelled.) (p. 69)
± When the ∂TX function is turned ON, hold down
to listen to the transmit frequency (including ∂TX
frequency offset). (p. 81)
± In the simplex operation, hold down to listen to
the receive frequency.
s4HESQUELCHISCLOSEDANDTHEINTERFERENCEREJECT
function is temporary OFF while holding down this
switch.
± In the DV mode, the RX monitoring mode is se-
lected by holding down this switch. (p. 118)
N Front panel (continued)
5
1
PANEL DESCRIPTION
@9 #0
#2
#3#4#5 #6 #7#1