User's Manual

N0OWERSUPPLYCONNECTIONS
When operating the transceiver with AC power, use a
power supply with 13.8 V DC output and a capacity of
at least 24 Amperes.
Refer to the diagrams below.
CAUTION: Before connecting the DC power
cable, check the following important items.
Make sure:
s4HE;0/7%2=SWITCHIS/&&
s/UTPUTVOLTAGEOFTHEPOWERSOURCEISTO6
when you use a non-Icom power supply.
s$#POWERCABLEPOLARITYISCORRECT
Red : Positive + terminal
Black : Negative _ terminal
27
2
INSTALLATION AND CONNECTIONS
Transceiver
Ground
PS-126
AC cable
AC outlet
To [DC 13.8V]
+
_
DC power cable
D#ONNECTINGTHE03$#0/7%23500,9
D#ONNECTINGANON)COM$#0/7%23500,9
N#ONNECTINGA$#POWERSUPPLY
Supplied DC power cable
AC cable
AC outlet
Transceiver
To [GND]
A DC power supply
6
at least 24 A
Red Black
To [DC 13.8V]
To [DC 13.8V]
For European versions
Transceiver
Ground
Connect to
power supply