User's Manual

60
4
RECEIVE AND TRANSMIT
4
D RTTY Set mode
4HE24493ETMODEISUSEDTOSETTHEMARKANDSHIFT
frequencies, keying type, decode USOS function,
2449DECODERNEWLINECODEANDTHENUMBEROFDE-
code screen display lines.
s3ETTINGCONTENTS
q
)NTHE2449MODEP ush [MENU] to display the “M1”
screen (Menu 1).
w0USH;2449=&TODISPLAYTHEh2449vSCREEN
e0USH;3%4=&TOENTERTHE24493ETMODE
r Push [Y](F-1) or [Z](F-2) to select the desired
item.
t Rotate [MAIN DIAL] to select the desired option.
s(OLDDOWN;&=FORSECONDTORESETTOTHEDEFAULTSET-
ting, if desired.
y0USH;-%.5=TOSAVEANDRETURN TOTHEh2449v
screen.
u
Push [MENU] to return to the “M1” screen (Menu 1).
2449-ARK&REQ1. $EFAULT
3ELECTTHE2449MARKFREQUENCY
sAND(ZARESELECTABLE
24493HIFT7IDTH2. $EFAULT
3ELECTTHE2449FREQUENCYSHIFT
sAND(ZARESELECTABLE
2449+EYING0OL3. $EFAULT./2-!,
Select normal or reverse keying polarity.
s./2-!, +EYOPENCLOSE-ARK3PACE
s2%6%23%+EYOPENCLOSE3PACE-ARK
Decode USOS 4. $EFAULT/.
Turn the USOS (UnShift On Space) function ON or
OFF. This function decodes a letter code after receiv-
ing a “space.”
s/&&$ECODESASACHARACTERCODE
s/. $ECODESASALETTERCODE
$ECODE.EW,INE5. $EFAULT#2,&#2,&
3ELECTTHEINTERNAL2449DECODERNEWLINECODE
CR: Carriage Return, LF: Line Feed
s#2,&#2,&-AKESANEWLINEWITHANYCODE
s#2,&  -AKES A NEW LINE WITH ONLY THE
CR+LF code.
$ECODE3CREEN6. $EFAULTLINE
Set the decoder screen display mode to 2 or 3 lines.
 1  2125
SET
RTTY Mark Freq
Select the item Reset to the default
setting