User's Manual

68
4
RECEIVE AND TRANSMIT
4
D 4URNING/.THE!UTO2EPEATERFUNCTION
53!AND+OREAVERSIONSONLY
When the operating frequency falls within the repeater
output frequency range, the Auto Repeater function
automatically sets the repeater settings (duplex ON/
OFF, duplex direction, tone encoder ON/OFF).
q Hold down [MENU] for 1 second to enter the Set
mode.
w Push [Y](F-1) or [Z](F-2) to select “Auto Re-
peater.”
e Rotate [MAIN DIAL] to turn ON the Auto Repeater
function.
 53!VERSION
  sh/.nv!CTIVATESDUPLEXONLY
  sh/.nv!CTIVATESDUPLEXANDTONE
  sh/&&v!UTOREPEATERFUNCTIONISTURNED/&&
 +OREAVERSION
  sh/.v!CTIVATESDUPLEXANDTONE
  sh/&&v!UTOREPEATERFUNCTIONISTURNED/&&
r Push [MENU] to save, and exit the Set mode.
[][]
[MAIN DIAL][MENU]
ON–1 (default for the U.S.A. version)
Ù 20 Ú ON–1
SET Auto Repeater
D3TORINGANONSTANDARDREPEATER
q Turn OFF the Auto Repeater function in the Set
mode. (p. 163)
w Push [A/B] to select VFO A.
e Rotate [MAIN DIAL] to set the repeater output fre-
quency.
r Push [A/B] to select VFO B.
t Rotate [MAIN DIAL] to set the repeater input fre-
quency.
y Push [A/B] to select VFO A.
u Push [SPLIT] to turn ON the Split function.
i Push [TON](F-4) to turn ON the previously set tone
encoder.
o Rotate [M-CH] to select the desired memory chan-
nel.
 sh",!.+vAPPEARSWHENABLANKCHANNELISSELECTED
!0 Hold down [MW] for 1 second to store the set con-
tents into the selected memory channel.
[TON] [MAIN DIAL] [M-CH]
[SPLIT][A/B] [MW]