User's Manual

102
8
DV MODE OPERATION
8
-AKINGA:ONE#1'ATEWAY#1CALL
NOTE: The settings are the same between Zone
CQ and Gateway CQ call.
CS CD R>CS UR DSET
D1
 GRP3
U IKOMA 3
Repeater selection screen
Appear
[TRANSMIT] [
[MAIN DIAL]
MAIN Band TX/RX indicator
The selected channel number blinks.
When a blank channel is selected.
()1ch ARAS CQCQ
MW
DV446.00000
( ) 5ch
MW
————————— . —————
D3TORINGTHESETDATA
9OU CANSAVETHE TEMPORARYSETTINGINTHE FOLLOWING
manner.
q After setting, push [MW] to enter the memory select
write mode
, then rotate [MAIN DIAL] or [M-CH] to
select the desired Memory channel, Call channel or
Program scan edge channel.
w H old down [MW] again for 1 second to store the set-
ting.
t Rotate [MAIN DIAL] to select a desired destination
repeater.
 s&IRSTSELECTINGTHE REPEATERCALLSIGN GROUPMAKESIT
more convenient, if you have programmed repeaters
into Groups. (p. 93)
y Push [PTT] on the microphone to transmit. (or
[TRANSMIT] on the transceiver)
 s4HE-!)."AND4828INDICATORLIGHTSRED
u Release [PTT] to receive. (or push [TRANSMIT]
again)
s#ALLING#1THROUGHALINKREPEATERINTHESAME
ZONE:ONE#1
My call sign：
JA3YUA
Repeater q ： NARA43 (JP3YHL)
Repeater r ： IKOMA43 (JP3YHJ)
CQ
q w e r
Area
Zone
s #ALLING#1THROUGHAGATEWAYREPEATER'ATEWAY
#1
Repeater e ：
Repeater y ：
CQ
q w e r
t y u i
MY call sign：
JA3YUA
Gateway
Gateway
Area
Zone A
Zone B
HIRANO43
(JP3YHH)
IcomUSA
(N7IH)