User's Manual

104
8
DV MODE OPERATION
8
Link repeater in the same zone
CS CD R>CS UR DSET
D1
R 2 IKOMA 4
Gateway repeater “GW”
CS CD R>CS UR DSET
D1
R 2 GW
-AKING A CALL TO AN INDIVIDUAL STATION THROUGH A
LINKREPEATERINTHESAMEZONE:ONECALL
MY call sign：
JA3YUA
Station call sign：
JG3YMK
Repeater q ： NARA43 (JP3YHL)
Repeater r ： IKOMA-43 (JP3YHJ)
q w e r
Area
Zone
u Rotate [MAIN DIAL] to select the link repeater in
the same zone.
 s/NLYREPEATERSWITHTHESAME GATEWAY REPEATERAP-
pear.
i Push [UR](F-4) to exit the selection mode.
i Push [PTT] on the microphone to transmit. (or
[TRANSMIT] on the transceiver)
 s4HE-!)."AND4828INDICATORLIGHTSRED
!0 Release [PTT] to receive. (or push [TRANSMIT]
again)
s!FTERTRANSMITTINGPUSH;-7=TOENTERTHEMEMORYSE-
lect write mode. (p. 102)
-AKING A CALL TO AN INDIVIDUAL STATION THROUGHA
GATEWAYREPEATER'ATEWAYCALL
Repeater e ：
Repeater y ：
HIRANO43
(JP3YHH G)
HAMA43
(JP1YIU G)
Gateway
Gateway
Area
Zone A
Zone B
q w e r
t y u i
MY call sign：
JA3YUA
Station call sign：
JM1ZLK
u Rotate [MAIN DIAL] to select “GW.”
 s4HEPREPROGRAMMEDGATEWAYREPEATERISSETAS2
 s/NLYREPEATERSWITHTHESAME GATEWAY REPEATERAP-
pear.
i Push [UR](F-4) to exit the Link repeater (R2) selec-
tion mode.
o Push [PTT] on the microphone to transmit. (or
[TRANSMIT] on the transceiver)
 s4HE-!)."AND4828INDICATORLIGHTSRED
!0 Release [PTT] to receive. (or push [TRANSMIT]
again)
s!FTERTRANSMITTINGPUSH;-7=TOENTERTHEMEMORYSE-
lect write mode. (p. 102)
[TRANSMIT] [UR] [MW]
[MAIN DIAL]
MAIN Band TX/RX indicator
NOTE: If other station has accessed a repeater at
least once, the D-STAR system will automatically
connect to the last repeater the station accessed,
even if you don’t know where the station is. So it is
no need to select the destination repeater.
[TRANSMIT] [UR] [MW]
[MAIN DIAL]
MAIN Band TX/RX indicator