User's Manual

108
8
DV MODE OPERATION
8
s#ALLING#1
My call sign：
JA3YUA
Repeater q ： JP3YHL
Repeater r ： JP3YHJ
CQ
q w e r
Area
Zone
s#ALLINGANINDIVIDUALSTATION
My call sign：
JA3YUA
Station call sign：
JG3YMK
Repeater q ： JP3YHL
Repeater r ： JP3YHJ
q w e r
Area
Zone
[TRANSMIT]
MAIN Band
TX/RX indicator
[MAIN DIAL]
[D[MENU]
[VFO/MEMO][SET][Z] [GRP]
UR

 UR
CLR
JG3YMK
EDT NAME GRP
R1

 R1
CLR
JP3YHL
EDT NAME GRP
UR

 U01
CQCQCQ
SET GRP
Rotate [MAIN DIAL]
R2

 R2
CLR
JP3YHJ
EDT NAME GRP
MY

 MY1
CLR
JA3YUA ⁄
EDT NAME
UR

 UR
CLR
CQCQCQ
EDT NAME GRP
s#ALLING#1 INTHESAMEZONE:ONE#1
q Select the desired frequency band. (p. 35)
w Push [VFO/MEMO] to select the VFO mode.
e Push [DVsDR] to select the DV mode.
r Set the repeater’s transmit frequency, duplex direc-
tion and offset. (pp. 37, 65, 163)
t
P ush [MENU] one or more times to display the “M3”
screen (Menu 3).
y
P ush [CS](F-1) to display the “CS” screen (Call
Sign).
u
P ush [Z](F-1) to display the “UR” screen, and rotate
[MAIN DIAL] to select UR call sign, then push [SET]
(F-4).
 s&IRSTSELECTINGTHECALLSIGNMEMORYGROUPSBYPUSHING
;43s'20=OR;'20=&MAKESITMORECONVENIENT
s When calling CQ : Select “CQCQCQ”
s When calling an individual station
: Select the station’s call sign
i P ush [Z](F-1) to display the “R1” screen, and rotate
[MAIN DIAL] to select the access repeater call sign,
then push [SET](F-4).
 s&IRSTSELECTINGTHE REPEATERCALLSIGN GROUPMAKESIT
more convenient, if you have programmed repeaters
into Groups. (p. 93)
 s0USH;.!-%=&TOTOGGLETHECALLSIGNANDREPEATER
name display, if the name has been programmed.
o P ush [Z](F-1) to display the “R2” screen, and rotate
[MAIN DIAL] to select the link repeater call sign in
the same zone, then push [SET](F-4).
!0
P ush [Z](F-1) TODISPLAYh-9vANDSETYOUROWNCALL
sign if necessary, then push [SET](F-4).
!1 Push [PTT] on the microphone to transmit. (or
[TRANSMIT] on the transceiver)
 s4HE-!)."AND4828INDICATORLIGHTSRED
!2 Release [PTT] to receive. (or push [TRANSMIT]
again)
 s)FANOTHERSTATIONSREPLIESITSCALLSIGNWILLBESTOREDIN
the receive log.
 s2ECEIVEDCALLSIGNSCANBEAUTOMATICALLYSTOREDINTOTHE
received call record. See page 95 for details.
s!FTERTRANSMITTINGROTATE;-#(=TOSELECTAMEMORY
channel, then hold down [MW] for 1 second to
save this
temporary programmed data
into the channel.
D-AKINGA#1CALLORACALLTOANINDIVIDUALSTATIONTHROUGHALINKREPEATERINTHESAME
ZONE:ONECALL