User's Manual

112
8
DV MODE OPERATION
8
D-ESSAGE4RANSMISSION
9OUCANSELECTAMESSAGECHANNEL4-n4-TOTURN
ON the message transmission function. When a mes-
sage channel is selected, the transceiver transmits the
pre-programmed text message. The default setting is
OFF.
q Set the operating frequency, call signs and other
settings, such as those for repeater operation, as
desired.
w
In the DV mode, p ush [MENU] one or more times to
display the “M3” screen (Menu 3).
 s)NTHE$2MODEP ush [MENU] once or twice to select
the “D1” screen.
e P ush [DSET](F-5) to display the “DSET” screen.
r
P ush [TXM](F-3) to display the “TXM” screen
(Transmit message).
t Rotate [MAIN DIAL] to select the desired transmit
message channel, then push [SET](F-5).
 s4-TO4-ARESELECTABLE
s7HEN/&&ISSELECTEDTHEMESSAGEISNOTTRANSMITTED
y P ush [MENU] to return to the “DSET” screen.
u Push [PTT] on the microphone to transmit the mes-
sage. (or push [TRANSMIT] on the transceiver)
s4HEMESSAGEISTRANSMITTEDEACHTIMEYOUPUSH;044=
(or [TRANSMIT]).
s4HEMESSAGEISAUTOMATICALLYTRANSMITTEDEVERYSEC-
onds during continuous transmission.
 s4HE-!)."AND4828INDICATORLIGHTSRED
D28MESSAGEDISPLAY
q In the DV mode, p ush [MENU] one or more times to
display the “M3” screen (Menu 3).
 s)NTHE$2MODEPUSH;-%.5=ONCEORTWICETOSELECT
the “D1” screen.
w P ush [CD](F-2) to display the “CD” screen (Call Re-
cord).
e Rotate [MAIN DIAL] to select the desired record
channel (RX01 to RX20).
r Push [Z](F-1) three times to select “MSG” item.
 s4HERECEIVEDMESSAGEISDISPLAYED
t Push [Z](F-1) or [MENU] to return to the record
channel, selected in step e.
NOTE: Up to 20 messages can be stored, but only
one message can be stored for each call sign.
The oldest message is cleared when 21st message
is received.
EDT
 TM1:
TXM
SET
[MAIN DIAL]
[MENU] [TXM]
[DSET]/[SET]
[TRANSMIT]
MAIN Band
TX/RX indicator
 For your information
When a call with a message is received, the call sign
and the message scrolls across the function display.
The received call sign and/or message display func-
tions can be turned OFF in the DV SET mode, if de-
sired.
± “RX Message Disp” item (p. 119)
± “RX Call Sign Disp” item (p. 119)
[MAIN DIAL]
[MENU]
[CD][√]
CD
 JG3YMK
JA3YUA
RX01
CLR COPY
CD
MSG : REPEATER IS JP3
YHH A
Ú
After selecting the record channel,
push [Z](F-1) three times.