User's Manual

114
8
DV MODE OPERATION
8
N$IGITALSQUELCHFUNCTIONS
The digital squelch opens only when receiving a sig-
nal addressed to your own call sign, or a signal that
INCLUDESAMATCHINGDIGITALCODE9OUCANSILENTLYWAIT
for calls from others.
NOTE: Use digital code squelch function when com-
municating with two or more stations, because the
digital call sign squelch function opens only when
receiving a signal addressed to your own call sign.
Thus the digital call sign squelch function can be
used when communicating with only one station.
q Select the desired frequency band. (p. 35)
w
In the DV mode, p ush [MENU] one or more times to
display the “M1” screen (Menu 1).
 s)NTHE$2MODEP ush [MENU] once or twice to select
the “D2” screen.
s4HESETTINGCANBERESPECTIVELYMADEINTHE$6MODE
and the DR mode.
e Push [DSQ](F-4) one or more times to turn ON the
digital call sign squelch or digital code squelch.
sh$31,vAPPEARSWHENTHEDIGITALCALLSIGNSQUELCHIS
ON.
 sh#31,vAPPEARSWHENTHEDIGITALCODESQUELCHIS/.
When digital call sign squelch is turned ON in step
e, skip steps r and t, and go to step y.
r When digital code squelch is turned ON in step e,
hold down [DSQ](F-4) for 1 second to display the
“DSQ” screen. And rotate [MAIN DIAL] to select the
desired code between 00 and 99.
s(OLDDOWN;&=FORSECONDTORESETTOTHEDEFAULTSET-
ting, if desired.
t P ush [MENU] to return to the “M1” screen (Menu
1).
 s)NTHE$2MODERETURNTO the “D2” screen.
y When the received signal includes a matching call
sign/code, the squelch opens and the signal can be
heard.
s7HEN THE RECEIVEDSIGNALSCALL SIGNCODE DOES NOT
match, digital call sign/digital code squelch does not
OPENHOWEVERTHE3METERSHOWSSIGNALSTRENGTH
M1
DUPAGC AFC DSQ SCP
M1
DUPAGC AFC DSQ SCP
[MAIN DIAL]
[MENU]
[DSQ]
Appears
00
DSQ Digital Code
“DSQ” screen (Digital code setting)
Appears