User's Manual

116
8
DV MODE OPERATION
8
N"REAKINCOMMUNICATION
The break-in function allows you to break into a con-
versation, where the two other stations are communi-
cating with call sign squelch enabled.
q While receiving another station’s communication
in
the DV mode, p
ush [MENU] one or more times to
display the “M3” screen (Menu 3).
 s)NTHE$2MODEP ush [MENU] once or twice to select
the “D1” screen.
w Hold down [R>CS](F-3) for 1 second to set the
other station’s call sign.
s7HENACALLSIGNHASNOTBEENRECEIVEDCORRECTLYERROR
beeps sound, and no call sign is set. Try to capture the
call sign of the signal again, or enter it manually.
e P ush [DSET](F-5) to display the “DSET” screen.
r
P ush [SET](F-5) to enter the DV Set mode.
t Push [Y](F-1) or [Z](F-2) to select “BK.”
y Rotate [MAIN DIAL] to turn ON the break-in func-
tion.
s“ ” appears.
u Push [MENU] to return to the “DSET” screen.
i When both stations are in standby, push [PTT] on
the microphone to transmit. (or push [TRANSMIT]
on the transceiver)
s4HEPROGRAMMEDCALLSIGNSTATIONRECEIVESTHEBREAKIN
call as well as your call sign.
 s4HE-!)."AND4828INDICATORLIGHTSRED
o Release [PTT] to receive. (or push [TRANSMIT]
again)
Wait for a reply call from the station who received
the break-in call.
!0 After receiving the reply call, communicate nor-
mally.
s“ ” blinks when receiving a break-in call.
!1 To cancel the break-in function, turn OFF the Break-
in function in the DV Set mode as shown in steps r
through y.
 18  ON
SET
BK
[TRANSMIT]
MAIN Band
TX/RX indicator
[MAIN DIAL]
[MENU] [R>CS]
[DSET]/[SET][][]
When the Break in function is ON.
Appears
(OWTOUSEBREAKIN
While using digital call sign squelch, the squelch never opens (no audio sounds) even if a call is received, unless
YOUROWNCALLSIGNh-9vISSPECIlEDP
However, when a call including the “BK ON” signal (break-in call) is received, the squelch will open and audio
sounds even if the call is specified for another station.
Station A Station B
Station C

Station A Station B
Station C

Station A and B
are communicating
using the digital
call sign squelch.
Station A and B
are communicating
using the digital
call sign squelch.
Station B never hears that
Station C is calling Station A.
Station B also hears that
Station C is calling Station A.
NOTE: The break-in function is automatically turned
OFF when transceiver is turned OFF.