User's Manual

9
121
GPS/GPS-A OPERATION
N'03OPERATION
9OUCANDISPLAYYOUROWN'03DATAINALLOPERATING
MODES9OUCANALSOTRANSMIT'03DATAWHENINTHE
DV mode. To receive GPS data, connect a third-party
GPS receiver that has an RS-232C output and NMEA
data format. Third-party GPS receivers connect to the
[DATA1] jack of the transceiver.
In addition, GPS messages can also be transmitted in
the GPS mode.
s4OCONNECTTHE'03RECEIVER
GPS
receiver
D'03SCREENCONSTRUCTION
q Hold down [CALL/GPS] for 1 second to display the
“GPS” screen.
w Push [POS](F-1), [GPM](F-2), [MSG](F-3) or [SET]
(F-5) to select the desired menu.
See the diagram below.
 s0USH;-%.5=TORETURNTOTHEPREVIOUSDISPLAY
AGC DUP COMP TBW SCP
M1
 1  4800
SET
GPS Receiver Baud
GPMPOS MSG SET
GPS
 GL WR
MY Position
M 35˚45.00’N ELE:−−−−ft
135˚36.00’E 12:00:00
ALM
GPM

RX
RXMTXM
MSG
GPS Message
s'03SCREEN
s0OSITIONSCREEN (p. 123)
s'03-EMORYSCREEN (p. 127)
s'03-ESSAGESCREEN (p. 125)
[F-1]
[F-2]
[F-3]
[POS]
[MENU] [MSG] [CALL/GPS]
[GPM] [SET]
The screen you want to appear first can be se-
lected between GPS and Position in the “GPS
1st Menu” item of the Set mode. (p. 165)
Hold down
s'033ETMODESCREEN (p. 132)
Push
Approximately 2 seconds
[F-5]
to the RS-232C port
( null modem adapter
is required)
OPC-1529R
(optional)
4RANSCEIVER
(Rear panel)
To the [DATA1] jack