User's Manual

127
9
GPS/GPS-A OPERATION
N'03MEMORYOPERATION
The transceiver has 50 GPS memory channels to store
the received position data, or other-used position data,
along with an alphanumeric channel name.
D!DDA'03MEMORY
q Hold down [CALL/GPS] for 1 second to display the
“GPS” screen.
w Push [GPM](F-2) to display the “GPM” screen (GPS
Memory).
e Rotate [MAIN DIAL] to select “ALL” or a desired
memory bank.
s The bank can be selected in ‘Memory bank setting,’ as
described on page 128.
r Push [LIST](F-1), then push [ADD](F-1) to enter the
“ADD” screen (GPS Memory Add) to manually add
new data.
4OCANCELTHEPROGRAMMEDDATA
When the “ADD” screen is selected, push
;-%.5=TODISPLAYh#ANCEL/+v0USH;9%3=
(F-4) to cancel programming and return to the
“GPM” screen, or push [NO](F-5) to keep pro-
gramming and return to the “ADD” screen.
t Push [Y](F-1) or [Z](F-2) to select the item.
-EMORY.AMEPROGRAMMING
q When “NAME” is selected, push [EDT](F-4) to
enter the memory name programming mode.
  s!CURSORAPPEARSANDBLINKS
w Push [F-1] one or more times to select the de-
sired character type.
#HARACTERTYPE 3ELECTABLECHARACTERS
ABC A to Z
abc a to z
etc
<" ’ ` ^ + – 1b
< > ( ) [ ] { } ¦ _ ¯ @
e Rotate [MAIN DIAL] to select the first character
or symbol to input.
When inputting numbers or a decimal point, push
the appropriate keypad key.
  s0USH;$%,=&TODELETETHESELECTEDCHARACTER
symbol or number.
  s0USH;30#=&TOINPUTASPACE
s7HENALLCHARACTERSHAVEBEENprogrammed, an
error beep sounds. If you want to reprogram, push
[Ω](F-2) or [≈](F-3) to select a character, then push
[DEL](F-4) to delete it.
r Push [Ω](F-2) to move the cursor backward, or
push [≈](F-3) to move the cursor forward.
t Repeat steps w through r to program a name
of up to 9 characters.
y Push [MENU] to save the programmed name,
and return to the “ADD” screen.
[CALL/GPS] [MAIN DIAL][LIST]/[ADD]/[]
[GPM]/[]
GPMPOS MSG SET
GPS
Push
LIST CLR ALM
GPM

ALL
DUPAGC AFC TON SCP
M1
Hold down
ALM
GPM

RX
Rotate [MAIN DIAL]
Push
EDTADD CLR ALM
GPM

00:
Push
ÚÙ EDT WR
ADD
NAME:
[][][F-1]
[DEL][MENU] [SPC]
[MAIN DIAL]
Keypad
s4OPROGRAMA'03MEMORYNAME
abc  DEL SPC
ADD
NAME:
Character type Cursor
Input a space
Delete a character
Move cursor forward
Move cursor backward
Select the character type
Select the item