User's Manual

130
9
GPS/GPS-A OPERATION
9
D'03ALARMSETTING
A GPS alarm can sound when a target position comes
into the alarm area. This function can be set to the
caller station, all GPS Memory channels, a specified
Memory bank or a specified Memory channel.
q Hold down [CALL/GPS] for 1 second to display the
“GPS” screen.
w Push [GPM](F-2) to display the “GPM” screen (GPS
Memory).
e Rotate [MAIN DIAL] to select the desired memory
group, or memory channel.
sh28vh!,,vAMEMORYBANKORMEMORYCHANNELCANBE
selected.
9OUCANSELECTAMEMORYCHANNELAFTERPUSHING;,)34=
(F-1) when “ALL” or a memory bank is selected.
r Push [ALM](F-5) to turn ON the Alarm function.
 s0USH;!,-=&AGAINTOTURN/&&THE!LARMFUNCTION
t Push [MENU] to return to the “GPS” screen.
 For your information!
s7HENh28vORMEMORYCHANNELISSELECTEDINSTEPe,
the alarm functions depend on “Alarm Area2” setting
in the GPS Set mode. (p. 133)
s7HENh!,,vORAMEMORYBANKISSELECTEDINSTEPe,
the alarm functions depend on “Alarm Area1” setting
in the GPS Set mode. (p. 133)
[CALL/GPS] [MAIN DIAL][MENU]
[GPM] [ALM]
GPMPOS MSG SET
GPS
Push
DUPAGC AFC TON SCP
M1
Hold down
ALM
GPM

RX
Rotate [MAIN DIAL]
LIST CLR ALM
GPM

ALL
Push
LIST CLR ALM
GPM

ALL
Appears when the Alarm function is ON.