User's Manual

139
10
-%-/29/0%2!4)/.
N-EMORYCHANNELSELECTION
W hen the SUB Band setting is turned ON, y ou can se-
lect a Memory channel in the SUB Band as well as in
the MAIN Band
. (p. 33)
sh ” appears when the SUB Band setting is ON.
D3ELECTIONINTHE6&/MODE
q Push [VFO/MEMO] to select the VFO mode.
w Rotate [M-CH] to select a Memory channel num-
ber.
 s2OTATECLOCKWISETOSELECTAHIGHER-EMORYCHANNEL
NUMBERROTATECOUNTERCLOCKWISETOSELECTALOWER-EM-
ory channel number.
 s!LL-EMORYCHANNELSINCLUDINGBLANKCHANNELSCANBE
selected.
sh
” appears when no information has been pro-
grammed into the Memory channel. (Blank channel)
e Push [VFO/MEMO] to select the Memory mode.
 sh-%-/vANDCONTENTSOFTHE-EMORYCHANNELAPPEAR
D3ELECTIONINTHE-EMORYMODE
q Push [VFO/MEMO] to select the Memory mode.
w Rotate [M-CH] to select a Memory channel.
 s2OTATECLOCKWISETOSELECTAHIGHER-EMORYCHANNEL
NUMBERROTATECOUNTERCLOCKWISETOSELECTALOWER-EM-
ory channel number.
 s!LL-EMORYCHANNELSINCLUDINGBLANKCHANNELSCANBE
selected.
sh
” appears when no information has been pro-
grammed into the Memory channel. (Blank channel)
 s-EMORYCHANNELSCANALSOBESELECTEDUSINGTHEMICRO-
phone [UP]/[DN] keys. In such case, the blank channels
are skipped.
[VFO/MEMO]
[M-CH]
While in the VFO mode
Appears if the selected Memory
channel has no information.
While in the Memory mode
N#ALLCHANNELSELECTION
Each frequency band has its own Call channel. Fac-
tory default frequency and operating modes are pro-
grammed into the Call channel. Change these to suit
your operating needs. (see page 141)
q0USH;#!,,s'03=TOSELECTTHE#ALLCHANNEL
 s!CAPITALh#vAPPEARS
w 0USH;#!,,s'03=AGAINTORETURNTOTHEPREVIOUS
screen display.

Appears