User's Manual

140
10
-%-/29/0%2!4)/.
10
Memory channels can be programmed in either the
VFO mode or the Memory mode.
D0ROGRAMMINGINTHE6&/MODE
q Push [VFO/MEMO] to select the VFO mode.
w Set the desired settings into both VFO A and VFO
B.
± Select the band using [BAND](MAIN/SUB).
± Set the frequency with [MAIN DIAL] or the key-
pad. (p. 37)
± Set the operating mode with the mode switch.
(p. 43)
± Set other data (e.g. frequency offset, duplex di-
rection, tone squelch, split frequency operation,
etc.), if desired. (p. 138)
e Rotate [M-CH] to select the Memory channel num-
ber to be programmed.
sh ” appears if the selected Memory channel is a
blank channel.
r Hold down [MW] for 1 second to program the con-
tents into the Memory channel.
s4HREEBEEPSSOUNDWHENTHEmemory programming is
complete.
D0ROGRAMMINGINTHE-EMORYMODE
q Push [VFO/MEMO] to select the Memory mode.
w Rotate [M-CH] to select the Memory channel to be
programmed.
s4HECONTENTSOFTHE-EMORYCHANNELAPPEARINTHEDIS-
play.
sh
” appears if the selected Memory channel is a
blank channel.
e Set the desired settings into the Memory channel.
± Set the frequency with [MAIN DIAL] or the key-
pad. (p. 37)
s7HENABLANKCHANNELISSELECTEDYOUMUSTSETTHE
desired frequency using the keypad.
± Set the operating mode with the mode switch.
± Set other data (e.g. frequency offset, duplex di-
rection, tone squelch, etc.), if desired.
r Hold down [MW] for 1 second to program the con-
tents into the Memory channel.
s4HREEBEEPSSOUNDWHENTHEMEMORYPROGRAMMINGIS
complete.
NOTE: If you perform the above operations in a pre-
programmed channel, the previous channel data will
be overwritten.
N-EMORYCHANNELPROGRAMMING
[MW]
[M-CH]
[EXAMPLE]:
Programming 7.088 MHz/LSB into the Mem-
ory channel 12 while in the VFO mode.
[EXAMPLE]:
Programming 21.280 MHz/USB into Memory
channel 18 while in the Memory mode.
s$URINGSETTINGTHECONTENTS
[MAIN DIAL]
Keypad[BAND](MAIN/SUB)
Mode selection