User's Manual
143
10
-%-/29/0%2!4)/.
N-EMORYNAMEPROGRAMMING
All Memory channels, including scan edges and Call
channel, can be tagged with alphanumeric names of
up to 9 characters each.
[EXAMPLE]: Programming a memory name into
Memory channel 99.
q Push [VFO/MEMO] to select the Memory mode.
w Rotate [M-CH] to select Memory channel 99.
e Push [MENU] one or more times to display the “M2”
screen (Menu 2).
r Push [MEM](F-2) to display the “MEM” screen
(Memory Menu).
t Push [EDT](F-1) to display the “EDT” screen (Mem-
ory name Edit).
s!CURSORAPPEARSANDBLINKS
s)FTHECHANNELYOUSELECTISABLANKCHANNELANERROR
beep sounds after pushing [EDT](F1).
y Push [F-1] one or more times to select the desired
character type.
s3EEh#HARACTERTABLELISTvASSHOWNBELOW
u Rotate [MAIN DIAL] to select the first character or
symbol to input.
When inputting numbers and a decimal point, push
the appropriate keypad key.
s0USH;$%,=&TODELETETHESELECTEDCHARACTERSYM-
bol or number.
s0USH;30#=&TOINPUTASPACE
s7HENALLCHARACTERSHAVEBEENprogrammed, an error
beep sounds. If you want to reprogram, push [Ω](F-2) or
[≈](F-3) to select a character, then push [DEL](F-4) to
delete it.
i Push [Ω](F-2) to move the cursor backwards, or
push [≈](F-3) to move the cursor forwards.
o Repeat steps y to i to program a memory name
of up to 9 characters.
!0 Push [MENU] to save the name, and return to the
“MEM” screen (Memory Menu).
!1 Push [MENU] to return to the “M2” screen (Menu
2).
#HARACTERTABLELIST
#HARACTER
TYPE
3ELECTABLECHARACTERS
ABC A to Z
abc a to z
etc
<" ’ ` ^ + – 1b;=[]
¦ _ ¯ @
[VFO/MEMO] [MEM] [EDT]
[M-CH][MENU]
SCAN MEM SWR TCON VS C
M2
EDT ( ) SEL
MEM
14.19500 USB
ABC
DEL SPC
EDT
[][]
[F-1] [DEL][SPC]
[MAIN DIAL]
Keypad
s7HENPROGRAMINGAMEMORYNAME
abc
DEL SPC
EDT
DX
spot
Character type Cursor
Input a space
Delete a character
Move cursor forwards
Move cursor backwards
Select character type
[EXAMPLE]: Programming “DX spot” into Memory
channel 99.
Push
Push