User's Manual

144
10
-%-/29/0%2!4)/.
10
9OUCANCALLUPAMEMOPADBYPUSHING;-02=ONEOR
more times while in either the VFO or Memory mode.
s4HEMEMOPADDATAISCALLEDUPSTARTINGFROMTHEMOST
recently written.
When you call up a memo pad, the previously dis-
played data is automatically stored in a temporary pad.
The temporary pad can be recalled by pushing [MP-R]
one or more times.
s9OUMAYTHINKTHEREAREMEMOPADSBECAUSEDIFFERENT
frequencies (5 are in memo pads and 1 is in the temporary
pad) are called up by [MP-R].
If you change the data called up from a memo pad,
the stored temporary pad data is replaced with the
changed data.
N-EMOPADFUNCTION
The transceiver has a Memo pad function to store
the displayed data for easy writing and recalling. The
memo pads are separate from the Memory channels.
The default number of memo pads is 5. However, you
can increase the number to 10 in the “Memopad Num-
bers” item of the Set mode, if desired. (p. 164)
Memo pads are convenient when you want to memo-
rize the displayed data temporarily, such as when you
find a DX station in a pile-up, or when a desired station
is busy for a long time and you want to temporarily
search for other stations.
Use the transceiver’s memo pads instead of relying on
hastily scribbled notes that are easily misplaced.
D7RITINGTHEDISPLAYEDDATAINTOMEMOPADS
9OUCANSTORETHEDISPLAYEDDATABYPUSHING;-07=
When you store the 6th data into memo pads, the old-
est stored entry is automatically erased, to make room
for the new data.
AGC DUP COMP TBW SCP
M1
In this example, 21.347 MHz (USB) will be
erased when 21.280 MHz (LSB) is written.
Memo pads
Erased
[MP-W]
Newest
Oldest
AGC DUP COMP TBW SCP
M1
[MP-R]
Newest
Oldest
[MP-R]
NOTE: Each memo pad must have its own unique
SETOFDATAMEMOPADSHAVINGIDENTICALDATACANNOT
be written.
D #ALLINGUPTHEMEMOPADS
Memo pads
Push
Push
Push