User's Manual

98
8
DV MODE OPERATION
8
This is a way to copy the call record data (“CALLER,”
“RXRPT1” and “RXRPT2”) into call sign memory “UR”
and a repeater all at the same time, or individually.
q Push [DVsDR] to select the DV mode.
w
P ush [MENU] one or more times to display the “M3”
screen (Menu 3).
 s)NTHE$2MODEPUSH;-%.5=ONCEORTWICETOSELECT
the “D1” screen.
e P ush [CD](F-2) to display the “CD” screen (Call Re-
cord).
r Rotate [MAIN DIAL] to select the desired record
channel (RX01 to RX20).
t
P USH;#/09=&TOenter the copy item selection
mode.
CD

JG3YMK
CQCQCQ
RX01
CLR COPY
y Push [Y](F-1) or [Z](F-2) to select the item to be
copied.
 s!,, 4HE#!,,%228204AND28204
call signs.
 s#!,,%24HECALLINGSTATIONSCALLSIGN
 s282044HECALLSIGNOFTHEREPEATERTHECALL-
ing station accessed, or the call sign of
the gateway repeater the calling station
used.
 s282044HECALLSIGNOFTHEREPEATERYOURHEARD
the call on.
CALLER : JG3YMK
Ú AUTO SELÙ
COPY
The options in step u are different, depending on
your selection in step y.
7HENhALLvISSELECTEDINSTEPy:
u Select the desired copy destination.
  s,)34 (OLDDOWN;,)34=&FORSECOND
to automatically search a blank call
sign memory channel, then copy the
call signs of CALLER, RXRPT1 and
RXRPT2 into the channel.
  s#522 (OLDDOWN;#522=&FORSECOND
to copy the call signs of CALLER,
RXRPT1 and RXRPT2 into the cur-
rent “UR,” “R1” and “R2” memory.
COPY
ALL
Ú LIST CURRÙ
7HENhCALLERvISSELECTEDINSTEPy:
u Select the desired copy destination
  s!54/ (OLDDOWN;!54/=&FORSECOND
to automatically search for a blank
call sign memory channel, and copy
the selected call sign into the de-
tected one.
  s3%, 0USH;3%,=&TOENTERTHECALLSIGN
memory channel selection mode.
Rotate [MAIN DIAL] to select the de-
sired channel to be pasted.
    s4HECONTENTSOFTHESELECTEDCHAN-
nel is displayed in parentheses.
Holzd down [SET](F-5) for 1 second
to paste the
calling station’s call sign
into the selected channel. If a call
sign has already been programmed,
the selected channel will be overwrit-
ten.
CALLER : JG3YMK
Ú AUTO SELÙ
COPY
UR

 U01
(JG3YMK)

SET
CALLER : JG3YMK
When “SEL” is selected, memory channel num-
ber and call sign blink.
7HENhRXRPT1vORhRXRPT2vISSELECTEDINSTEPy:
u Hold down [RP-L](F-5) to copy the repeater call
sign into the repeater list “R1” or “R2.”
COPY
RxRPT1:
Ú RP–LÙ
i After copying has been completed, transceiver au-
tomatically returns to the “CD” screen.
D#OPYINGTHECALLRECORDCONTENTSINTOCALLSIGNMEMORY
[√] [CD] [CLR]
[MENU] [DV・DR] [MAIN DIAL]
Push