User's Manual
166
14
SET MODE
14
%840!-047. $EFAULT/&&
Switch the preamplifier control ON or OFF. When
using the optional AG-1200*, ON must be selected.
Otherwise, the preamplifier will not function.
*AG-1200 has been discontinued, but it can be still be used.
DO NOT connect any equipment, such as an SWR or
power meter, between the transceiver and preampli-
fier. In such case, the preamplifier may not function
correctly.
This item appears only when the optional UX-9100 is
installed.
%84303EPARATE48. $EFAULT3EPARATE
Select the audio output method when the optional
external speakers are connected to both [EXT-SP
(MAIN)] and [EXT-SP (SUB)] jacks.
s3EPARATE 4HE -!). AND 35" "AND AUDIO ARE
separately sent to the [EXT-SP (MAIN)]
and [EXT-SP (SUB)] jacks.
s-IX 4HE -!). AND 35" "AND AUDIO ARE
combined and sent to both the [EXT-SP
(MAIN)] and [EXT-SP (SUB)] jacks.
0HONE3EPARATE49. $EFAULT!UTO
Select the audio output method when headphones are
connected to the transceiver.
s3EPARATE 4HE -!). AND 35" "AND AUDIO ARE
separately sent to the right speaker
(MAIN Band) and left speaker (SUB
Band).
s-IX 4HE -!). AND 35" "AND AUDIO ARE
combined, and sent to both the right
and left speakers.
s!UTO 7HENTHE35""ANDISDISPLAYEDTHE
MAIN and SUB Band audio are sepa-
rately sent to the right speaker (MAIN
Band) and left speaker (SUB Band).
When the SUB Band is not displayed,
the MAIN Band audio is sent to both the
left and right speakers.
3UB"AND-UTE4850. $EFAULT/&&
Turn the SUB Band Audio Mute function ON or OFF.
While transmitting, the SUB band audio is muted when
this function is turned ON.
s/&& 4HE35""ANDAUDIOISNOTMUTED
while transmitting.
s/.30/NLY 4HE35""ANDAUDIOSENTTOTHE
speaker, is muted while transmit-
ting.
s/.3053"4HE35""ANDAUDIOSENTTOTHE
speaker and USB port, is muted
while transmitting.
!##!&31,3ELECT51. $EFAULT-!).
Set the [ACC] socket’s pin 12 (AF) and pin 13 (SQLS)
output usage.
s-!).3ENDSTHE-!)."ANDSRECEIVEAUDIOAND
squelch.
s35" 3ENDS THE 35" "ANDS RECEIVE AUDIO AND
squelch.
$!4!!&31,3ELECT52. $EFAULT-!).
Set the [DATA2] socket’s pin 4 (DATA), pin 5 (AF) and
pin 6 (SQL) output usage.
s-!).3ENDSTHE-!)."ANDSRECEIVEAUDIOAND
squelch.
s35" 3ENDS THE 35" "ANDS RECEIVE AUDIO AND
squelch.
63%.$3ELECT53. $EFAULT/.
Set the [ACC] socket’s pin 7 (VSEND) and pin 3
(HSEND) output usage.
s/&& 63%.$ISNOTUSED
HSEND is used for all bands.
s5(&/NLY 63%.$ISUSEDFORTHE-(ZAND
1200 MHz bands.
HSEND is used for the HF/50 MHz and
144 MHz bands.
s/. 63%.$ IS USED FOR THE -(Z
430 MHz, and 1200 MHz bands.
HSEND is used for the HF/50 MHz
bands.