User's Manual

169
14
SET MODE
D The 4ONECONTROL3ETMODESETTINGS
q Push [MENU] one or more times to display the “M2”
screen (Menu 2).
w
Push [TCON](F-4) to enter the Tone control Set
mode.
e Push a mode switch to select the desired operating
mode.
r Push [Y](F-1) or [Z](F-2) to select the desired
item.
s3ELECTABLEITEMSDIFFERDEPENDINGONTHESELECTEDOPER-
ating mode.
t Rotate [MAIN DIAL] to select the desired option.
s9OUCANSELECTTHEOPTIONFOREACHOPERATINGMODE
s(OLDDOWN;&=FORSECONDTORESETTOTHEDEFAULTSET-
ting, if desired.
y Push [MENU] to save, and exit the Set mode.
Select the item
Reset to the default
setting
Mode switches
[]
[MENU]
[F-3] [TCON]
[MAIN DIAL]
[][]
Ù 1 Ú
SSB
[ – – – ] – – – –
TCON
RX HPF⁄LPF
Displays the Set mode
item name and number
Displays the option
RX HPF/LPF 1. $EFAULT/&&
-ODE33"#72449!-&-$6
First select the operating mode, then set the receive
audio high-pass filter to between 100 Hz and 2000 Hz
in 100 Hz steps.
NOTE: When the receive audio high-pass and low-
pass filters are active, “RX Bass” and “RX Treble”
items will be reset to the default value.
RX HPF/LPF 2. $EFAULT/&&
-ODE33"#72449!-&-$6
First select the operating mode, then set the receive
audio low-pass filter to between 500 Hz and 2400 Hz
in 100 Hz steps.
NOTE: When the receive audio high-pass and low-
pass filters are active, “RX Bass” and “RX Treble”
items will be reset to the default value.
28"ASS3. $EFAULT
-ODE33"!-&-$6
First select the operating mode, then set the receive
audio bass level to between –5 and +5.
284REBLE4. $EFAULT
-ODE33"!-&-$6
First select the operating mode, then set the receive
audio treble level to between –5 and +5.
48"ASS5. $EFAULT
-ODE33"!-&-$6
First select the operating mode, then set the transmit
audio bass level to between –5 and +5.
484REBLE6. $EFAULT
-ODE33"!-&-$6
First select the operating mode, then set the transmit
audio treble level to between –5 and +5.
4"77)$%,7. $EFAULT
-ODE33"
Set the lower cut-off frequency of the transmission
passband width for your wide setting to 100, 200, 300
or 500 Hz.
4"77)$%(8. $EFAULT
-ODE33"
Set the higher cut-off frequency of the transmission
passband width for your wide setting to 2500, 2700,
2800 or 2900 Hz.
Displays the selected
operating mode
N4ONECONTROL3ETMODEDESCRIPTION