User's Manual

100
8
DV MODE OPERATION
8
s!CCESSREPEATERSCAN’STARGETSETTING
9OUCANSELECTTHEDESIREDREPEATERSASASCANTARGET,
for faster selection and scanning.
Non-selected repeaters are skipped during scanning.
s When a repeater is specified as a non-scan target, its
“R1USE” setting is automatically set to NO. In this case,
the repeater cannot be selected as the access repeater.
(p. 90)
q In the DR mode, p ush [MENU] one or more times to
display the “D2” screen.
w Rotate [MAIN DIAL] to select the desired access
repeater.
 s&IRSTSELECTINGTHE REPEATERCALLSIGN GROUPMAKESIT
more convenient, if you have programmed repeaters
into Groups. See the description in page 93 for details
of the repeater call sign group selection.
e Hold down [SEL](F-2) for 1 second to set the select
setting to ON.
sh3%,vAPPEARS
r Push [SEL](F-2) to set the select setting to OFF.
sh3%,vDISAPPEARS
t Push [MENU] to return to the “D2” screen.
D!CCESSREPEATERSCAN
The Access repeater scan is useful to find a repeater.
For rapidly find, the Access repeater scan skips the
repeaters which are not specified as a scan target.
9OUCANSELECTTHEDESIREDREPEATERSASASCANTARGET
See page 90 or ‘Access repeater scan’s target setting’
as described below.
q Hold down [DVsDR] for 1 second to select the DR
mode.
s4HE$6MODEISAUTOMATICALLYSELECTED
sThe access repeater selection screen is displayed.
- Only the repeaters, specified as a scan target are dis-
played.
w P ush [MENU] one or more time to display the “D2”
screen.
e Push [SCAN](F-1) to start the Access repeater
scan.
s4HE-(ZANDK(ZDECIMALPOINTSANDh ” blink while
scanning.
 s(OLDDOWN;3#!.=&FORSECONDTOENTERTHE3CAN
set mode. Push [MENU] to exit the Scan set mode.
- If
“Up/Down” is selected as the “MAIN DIAL (SCAN)”
option
in the Scan Set mode, rotating [MAIN DIAL]
changes the scanning direction. (p. 147)
 s4HESCANPAUSESWHENASIGNALISRECEIVED
r Push [SCAN](F-1) to cancel the scan.
[D

[MAIN DIAL]
[D[MENU]
[SEL] 
GRP
SCAN SEL AF C DSQ TCON
D2
GRP3
SCAN SEL AF C DSQ TCON
D2
R HIRANO4
GRP1
SCAN SEL AF C DSQ TCON
D2
R FUJ SW4
GRP1
SEL
D2
FU ISW4
SEL
GRP1
SEL
D2
FU ISW4
When the select setting is OFF.
GRP1
SCAN SEL AF C DSQ TCON
D2
R HAMACH 3
Rotate [MAIN DIAL]
Hold down
Push
While Access repeater scanning