User's Manual

182
17
MAINTENANCE
17
N$ATACLONING
D#LONINGBETWEENTRANSCEIVERS
The IC-9100 has transceiver-to-transceiver data clon-
ing capability.
This function is useful when you want to copy all of the
programmed contents from one IC-9100 to another.
s!MINIPLUGCABLEISREQUIRED0URCHASESEPARATELY
q Connect a mini plug cable to the [REMOTE] jack of
the master and sub transceivers.
s4HEMASTERTRANSCEIVERISUSEDTOSENDDATATOTHESUB
transceiver.
w 3UBTRANSCEIVERSOPERATION
While holding down [F-1] on the sub transceiver,
push [POWER] to turn ON the power and enter the
cloning mode.
-ASTERTRANSCEIVERSOPERATION
While holding down [F-2] on the master transceiver,
push [POWER] to turn ON the power and enter the
cloning mode.
sh#,/.%vAPPEARSANDTHETRANSCEIVERSENTERTHECLONE
standby mode.
sh-vAPPEARSONTHEMASTERTRANSCEIVERSDISPLAYTOINDI-
cate it as the master transceiver.
e Push [OUT](F-5) on the master transceiver.
sh#,/.%/54vAPPEARSONTHEMASTERTRANSCEIVERSDIS-
play, and the bar meter shows that data is being trans-
ferred to the sub-transceiver.
sh#,/.%).vAPPEARSAUTOMATICALLYONTHESUBTRANS-
ceiver’s display, and the bar meter shows that data is
being received from the master transceiver.
r When cloning is finished, turn power OFF, then ON
again to exit the cloning mode.
sh#,/.%%.$vAPPEARSAUTOMATICALLYONTHESUBTRANS-
ceiver’s display after the cloning is completed.
D#LONINGUSINGAPERSONALCOMPUTER
The optional CS-9100 CLONING SOFTWARE is also available to
clone/edit contents with a PC using ICF format files.
Microsoft
®
Windows
®
XP (32bit), Windows Vista
®
(32/64bit)
or Windows
®
7 (32/64bit) OS is required.
s!53"CABLEISREQUIREDTOCONNECTTHETRANSCEIVERANDA
PC. (Purchase separately)
[REMOTE]
Mini plug cable
(Purchase separately)
[USB]
USB cable
(Purchase separately)
PC
Use as short a mini plug cable as possible.
Depending on the length of the cable, data cloning
cannot be done.