User's Manual

101
8
DV MODE OPERATION
N#ALLING#1
&IRSTPROGRAMA-9CALLSIGNINSTEPq.
Next program the repeater list (p. 89). After that, follow
this guide to access a D-STAR repeater.
The optional CS-9100* cloning software is helpful for
programming call signs and programming the repeater
list.
*Cloning cable is required.
q3ETYOUROWNCALLSIGN-9(p. 85)
w Hold down [DVsDR] for 1 second to select the DR
mode.
sThe last used access repeater is displayed.
- If the displayed frequency band on the SUB Band is
the same as that of the last used access repeater, se-
lecting the DR mode on the MAIN Band will automati-
cally move the frequency band on the SUB Band to
the Main Band display, and turn OFF the SUB Band
display.
e Rotate [MAIN DIAL] to select the desired access
repeater.
 s/NLYTHEREPEATERS, whose “R1USE” setting is set to
9%3OR!CCESSREPEATERSCANTARGETS are displayed.
(pp. 90, 100)
 s&IRSTSELECTINGTHE REPEATERCALLSIGN GROUPMAKESIT
more convenient, if you have programmed repeaters
into Groups. (p. 93)
 s!CCESSREPEATERSCANCANBEUSEDFORTHESELECTION
(p. 100)
r Push [UR](F-4) to enter the UR call sign selection
mode.
Steps t through u differ, depending on the com-
munication form.
CS CD R>CS UR DSET
D1
GRP3
R NARA43
CS CD R>CS UR DSET
D1
UR
U CQCQCQ
[MAIN DIAL]
[D
Access repeater selection screen
UR call sign selection screen
Repeater group selection screen
Appears
 GRP3
CS CD R>CS UR DSET
D1
R NARA4
Appear
[TRANSMIT] [
[MAIN DIAL]
MAIN Band TX/RX indicator
-AKINGA#1CALLTHROUGHYOURLOCALAREAACCESS
REPEATER,OCAL!REA#1
My call sign：
JA3YUA
CQ
Area
Zone
Repeater q ： NARA43 (JP3YHL)
q w e r
t Rotate [MAIN DIAL] to select “CQCQCQ.”
 s&IRSTSELECTINGACALLSIGNGROUPAS“CQCQCQ” by push-
ING;43s'20=MAKESITMORECONVENIENT
y Push [PTT] on the microphone to transmit. (or
[TRANSMIT] on the transceiver)
 s4HE-!)."AND4828INDICATORLIGHTSRED
u Release [PTT] to receive. (or push [TRANSMIT]
again)